DryWallCarolina Resizable Drywall Repair Plugs
PO Box 26492 Greenville SC 29616
Medium DWC Standard Drywall Repair Plug
Repair holes up to 8 inches in diameter in 1/2 Inch standard drywall. Perfect for fist sized holes and many other holes on most residential projects. Re-size to fix other medium sized holes.
Purchase a single unit for $15.00
Purchase a 10 Pack for $135.00
Medium DWC Fire Rated Drywall Repair Plug
Commercial uses include wire pulling holes, water and sewage penetrations and outdated duct holes. Simply re-size to quickly repair any sized empty electrical box in the wall or ceiling.
Purchase a single unit for $17.00
Purchase a 10 Pack for $150.00
Step 1: Resize the plug or use the package holder template to mark the damaged area of the drywall you need removed for repair.
Once marked, use a drywall saw/knife to cut the circle out. Cut on the outside of the line
Double check your fit by placing the plug into the hole. 1 inch of movement or less between the drywall repair plug and hole is acceptable.
Step 2: Load plug with joint compound as shown and place in hole. Wipe patch down until it's flush with the wall and joint compound is coming out of all the face material holes. Make sure the plug always stays centered.
Don't be afraid of wiping too hard. Our face material is made from a tough composite and is strong enough not to be bothered by any amount of over wiping or over sanding.
Step 3: When patch is set apply a thin coat of joint compound. Keep your mud work smooth.
Because our face material is less than 1/16 inch thick, you only need to apply thin coats of joint compound to achieve good results.
When throughly dry, sand and recoat with joint compound. When dry, run your hand across the entire repair. Recoat & sand if necessary.
US shipping costs included in quoted price.
Fax 864-676-2882 for international order information.
Thank's for your interest in DWC Drywall Repair Plugs
DWC Resizable Drywall Repair Plugs